Twin Jack Passenger

	Home \| Careers \| Contact Us \| Forms \| Brochures \| MSDS Sheets

Passenger Elevators > Twin Jack Holeless, 1 & 2 Stage

Single Opening (F)

Double Opening (F/R)

= Platform Width

= Platform Depth

= Hoistway Width

= Hoistway Depth

= Clear Door Opening
= Overhead
= Pit Depth

Download Written Specifications
	2000-4500 lbs.
	5000-6000 lbs.
	8000-15000 lbs.

Printable Brochure

Passenger Elevators – Standard Specifications (Low Capacity)
Cap.	Platform x	Hoistway x	Front (F) Rear (R)	Laminate Clear Inside W x D	Door Type	Door Width	Elevation & Plan View Drawings
2100	6'-0" x 5'-1"	7'-4" x 5'-9"	F	5'-9" x 4'-3 ½"	1-SP	3'-0"
2100	6'-0" x 5'-8"	7'-4" x 6'-8 ½"	F/R	5'-9" x 4'-3 ½"	1-SP	3'-0"
2500	7'-0" x 5'-1"	8'-4" x 5'-9"	F	6'-9" x 4'-3 ½"	1-SP	3'-6"
2500	7'-0" x 5'-8"	8'-4" x 6'-8 ½"	F/R	6'-9" x 4'-3 ½"	1-SP	3'-6"
3000	7'-0" x 5'-6"	8'-4" x 6'-2"	F	6'-9" x 4'-8 ½"	1-SP	3'-6"
3000	7'-0" x 6'-1"	8'-4" x 7'-1 ½"	F/R	6'-9" x 4'-8 ½"	1-SP	3'-6"
3500	7'-0" x 6'-2"	8'-4" x 6'-10"	F	6'-9" x 5'-4 ½"	1-SP	3'-6"
3500	7'-0" x 6'-9"	8'-4" x 7'-9 ½"	F/R	6'-9" x 5'-4 ½"	1-SP	3'-6"
4000	8'-0" x 6'-2"	9'-6" x 7'-0"	F	7'-9" x 5'-3"	2-SP	4'-0"
4000	8'-0" x 6'-8"	9'-6" x 7'-11 ½"	F/R	7'-9" x 5'-0 ½"	2-SP	4'-0"
Pit Depth = 4'-0" • Minimum Overhead = See Below • Cab Height = 8'-0"

Hospital Elevators – Standard Specifications
Cap.	Platform x	Hoistway x	Front (F) Rear (R)	Laminate Clear Inside W x D	Door Type	Door Width	Elevation & Plan View Drawings
3500H	5'-4" x 8'-4"	6'-10" x 9'-2"	F	5'-1" x 7'-5"	2-SP	3'-6"
3500H	5'-4" x 9'-0 ½"	6'-10" x 10'-4"	F/R	5'-1" x 7'-5"	2-SP	3'-6"
4000H	6'-0" x 8'-5"	7'-7" x 9'-3"	F	5'-9" x 7'-6"	2-SP	4'-0"
4000H	6'-0" x 9'-1 ½"	7'-7" x 10'-5"	F/R	5'-9" x 7'-6"	2-SP	4'-0"
4500H	6'-0" x 9'-2"	7'-7" x 10'-0"	F	5'-9" x 8'-3"	2-SP	4'-0"
4500H	6'-0" x 9'-10 ½"	7'-7" x 11'-2"	F/R	5'-9" x 8'-3"	2-SP	4'-0"
5000H	6'-0" x 9'-7 ½"	7'-8" x 10'-5 ½"	F	5'-9" x 8'-8"	2-SP	4'-0"
5000H	6'-0" x 10'-3 ½"	7'-8" x 11'-7"	F/R	5'-9" x 8'-8"	2-SP	4'-0"
Pit Depth = 4'-0" • Minimum Overhead = See Below • Cab Height = 8'-0"

Passenger Elevators – Standard Specifications (High Capacity)
Cap.	Platform x	Hoistway x	Front (F) Rear (R)	Laminate Clear Inside W x D	Door Type	Door Width	Elevation & Plan View Drawings
6000	7'-0" x 8'-6"	8'-8" x 9'-4"	F	6'-9" x 7'-7"	2-SP	4'-0"
6000	7'-0" x 9'-2 ½"	8'-8" x 10'-6"	F/R	6'-9" x 7'-7"	2-SP	4'-0"
8000	8'-4" x 10'-0"	10'-2" x 10'-10"	F	8'-1" x 9'-1"	2-SP	4'-0"
8000	8'-4" x 10'-8 ½"	10'-2" x 12'-0"	F/R	8'-1" x 9'-1"	2-SP	4'-0"
10000	8'-4" x 11'-8 ½"	10'-4" x 10'-11"	F	8'-1" x 10'-9 ½"	2-SP	4'-0"
10000	8'-4" x 12'-5"	10'-4" x 13'-8 ½"	F/R	8'-1" x 10'-9 ½"	2-SP	4'-0"
12000	10'-4" x 11'-6"	12'-6" x 12'-4"	F	10'-1" x 10'-7"	2-SP	4'-0"
12000	10'-4" x 12'-2 ½"	12'-6" x 13'-6"	F/R	10'-1" x 10'-7"	2-SP	4'-0"
15000	12'-0" x 11'-5"	14'-4" x 12'-3"	F	11'-9" x 10'-6"	2-SP	4'-0"
15000	12'-0" x 12'-1 ½"	14'-4" x 13'-5"	F/R	11'-9" x 10'-6"	2-SP	4'-0"
Pit Depth = 4'-0" • Minimum Overhead = See Below • Cab Height = 8'-0"

Notes:

MEI can provide Standard pre-engineered sizes as detailed as well as Non-Standard or Custom sizes. Please consult your MEI representative.
See entrance details for sill recess and entrance wall requirements.
Adequate supports for rail fastening are required per layout drawing. Inserts must be installed in block or brick walls. Block must be filled with mortar around inserts to provide rigid support. NOTE: per rail force shown on layout drawing.
Wood and steel/frame walls require suitable header support with inserts at each rail bracket location. NOTE: per rail force shown on layout drawing

*Maximum Inside Net Platform Areas for the Various Rated Loads**
Rated Load, lb.	Inside Net Platform Area, ft²
2,100	24.2
2,500	29.1
3,000	33.7
3,500	38.0
4,000	42.2
4,500	46.2
5,000	50.0
6,000	57.7
8,000	72.9
10,000	88.0
12,000	103.0
15,000	125.1

Quick check for determining overhead required:
For 1 Stage Jack	For 2 Stage Jack
A) Car Speed = Up to 150 FPM B) Top Overtravel = 5" C) Bottom Overtravel = 12" D) Pit Depth = 4'-0" E) Cab Height = 8'-0"	A) Car Speed = Up to 150 FPM B) Top Overtravel = 5" C) Bottom Overtravel = 10" D) Pit Depth = 4'-0" E) Cab Height = 8'-0"
One Stage Jack Overhead Requirement: Minimum of 12'-0" overhead required for 12'-0" of travel and under. If over 12'-0" travel, overhead must equal or be greater than total travel. Two Stage Jack Overhead Requirement: Minimum of 12'-8" overhead required for 20' of travel and under. Add ½" to 12'-8" for every additional 1" of travel over 20'-0".

*To allow for variations in cab designs, an increase in the maximum inside net platform area not exceeding 5%, shall be permitted for the various rated loads.

GENERAL NOTE:

1 lb. = 0.454 kg 1ft² = 9.29 E-2m²

APPROXIMATE CLEAR INSIDE DIMENSIONS OF CAB:

WIDTH = Platform less 4" Returnable Panel, Platform less 3" Laminate

DEPTH =
Single Opening
       With Single Slide or Center Parting Doors
       .......Platform less 9 ½" Laminate, Platform less 10" Returnable Panel
       With Two Speed Doors
       .......Platform less 11" Laminate, Platform less 11 ½" Returnable Panel

Double Opening
With Single Slide or Center Parting Doors
.......Platform less 16 ½" Laminate or Returnable Panel

With Two Speed Doors
....Platform less 19 ½" Laminate or Returnable Panel