Extend the Life of your Hydraulic Elevator System!
The Silencer is an in-line device that reduces the noise and vibration of any hydraulic power unit (similar to the muffler on an automobile).
Reduced Pulsations = Reduced Noise, Leakage, and Component Wear.
Pump pulsations cause vibrations. Transmitted by the piping throughout the system, vibrations cause noise, leakage, and early component failure. When the Silencer stops the pulsations, it stops the source of the vibrations. This improves system performance and reduces service calls, pleasing your client and improving your reputation.
Benefits
- 40-60% reduction in system noise and vibration
- Extended component life
- Fewer leaks
- Lower long-term system maintenance costs
- Smoother system operation
How it Works
Hydraulic pulsations (noise) enter the silencer and go through three different noise baffles or diffusers. After passing through these baffles, the pulsations then strike a rubber tube, or bladder, charged with air to 35% to 50% of the hydraulic operating pressure. Hit by a pulsation, the bladder deflects slightly, reducing the size of the pulsation and therefore, the noise.
Recommended Applications
Dry or submersible hydraulic power units for all hydraulic elevator car types. |
