Extend the Life of your Hydraulic Elevator System!
Avoid hot oil problems like nuisance shutdowns, leveling problems, and oil odor by installing the MEI BOL Oil Cooler.
Designed to be mounted in a remote location in order to connect to the duct/ventilation system of the building.
Benefits
- Smoother stops and starts
- Extended component life
- Fewer shutdowns
- Overall performance improvement
- Filter sight gauge
Recommended Applications
- Twin jack holeless applications with two- or three-stage telescopic jacks.
- Heavily used single-stage twin jack holeless projects.
- Roped hydraulic applications with moderate usage and travel exceeding 25 feet.
- Any hydraulic elevator with high usage.
Specifications
- 3/4 HP, 115 VAC, 1 phase, 7.2 FLA pump motor
or 208-230 VAC, 1 phase, 3.6 FLA pump motor
- 1/2 HP, 115 VAC, 1 phase, 3.7 FLA 1425 CFM fan motor
or 208-230 VAC, 1 phase, 2.2 FLA 1425 CFM fan motor
- Heat removal: 21,600 BTU/hr @ 40°F temp delta
- 8 GPM, 75 PSI cast iron pump
- Weighs approximately 140 lbs
- Adjustable thermostat control
- 80db at 3 ft.
- Electrical requirement, 115 or 208 VAC, 1 phase, 20amp separate circuit
- 10 micron filter in hydraulic oil line
- Filter head with sight gauge to indicate when the filter needs to be changed
- Heavy gauge frame construction
- Includes all fittings and hardware needed for ventilation duct mount installation
- Includes instructions for installation
|
